Premier Gold
A contract grade double sided tape with a very heavy coating of aggressive synthetic rubber resin adhesive and easily tearable woven cotton carrier, providing high initial tack and subsequent bond strength. Flexible and conformable to all floor surfaces. Excellent gap fill and adhesion to heavily textured carpet backings. Suitable for installing rubber, foam-backed carpets, traditional, polyurethane and woven polypropylene backings.
Suitable for luxury use
Sponge rubber suitable for stretch-fit installation of carpets
End Use Classification (BS 5808: 1991): L/U, Luxury Use
Standard Specifications
Nominal square weight 4068 g/m² (120 oz/yd²)
Nominal roll weight 44.5 kg
Roll area 10.96m² (1.33m x 8.24m)
BS 5808: 1991
End Use Classification L/U, Luxury Use
Nominal thickness 11.40mm BS 4051
Work of compression Minimum 50 J/m² 180 J/m² BS 4908 & BS 4052
Retention of work of compression (min 40%) 67 % BS 4908 & BS 4052
Compression after dynamic loading 6.8 mm BS 4908 & BS 4052
Loss in thickness after dynamic loading (max 15%) 6.8 % BS 4052
Loss in thickness after static loading (max 15%) 8.5 % BS 3939
Resistance to cracking (not greater than 50mm) Pass BS 5808
Flammability
Hot metal nut test (tested in Interfloor laboratory) Low radius of effects of ignition BS 4790 & BS 5287
Russian GOST FR Test Classification KM5 GOST 30244-94, GOST 30402-96
GOST 51032-97, GOST 12.1.044-89 (item 4.18)
GOST 12.1.044-89 (item 4.20)
Other Specifications
No objectionable odour
Antimicrobial and mildew resistant
Colour / backing Red / printed Textron® backing
Packaging White film / red print
Thermal resistance 1.65 togs BS 4745
Impact sound reduction (Delta Lw) 46dB BSEN ISO 140-8: 1998 and BSEN ISO 717-2: 1997
Emissions (US Carpet & Rug Institute) Meets low VOC emission criteria
Suitable for luxury use
Sponge rubber textured flat suitable for the stretch-fit installation of carpets
End Use Classification (BS 5808: 1991): L/U, Luxury Use
Standard Specifications
Nominal square weight 3695 g/m² (109 oz/yd²)
Nominal roll weight 40.5 kg (89 lb)
Roll area 10.96m² (1.33m x 8.24m)
BS 5808: 1991
End Use Classification L/U, Luxury Use
Nominal thickness 9.75mm BS 4051
Work of compression Minimum 50 J/m² 161 J/m² BS 4908 & BS 4052
Retention of work of compression (min 40%) 70 % BS 4908 & BS 4052
Compression after dynamic loading 6.5 mm BS 4908 & BS 4052Loss in thickness after dynamic loading (max 15%) 2.4 % BS 4052
Loss in thickness after static loading (max 15%) 9.8 % BS 3939
Resistance to cracking (not greater than 50mm) Pass BS 5808
Flammability
Hot metal nut test (tested in Interfloor laboratory) Pass BS 4790 & BS 5287
Other Specifications
Odour No objectionable odour
Antimicrobial and mildew resistant Yes
Colour / backing Maroon / printed Textron® backing
Packaging Yellow film / black print
Thermal resistance 1.5 togs BS 4745
Impact sound reduction (Delta Lw) 42 dB BSEN ISO 140-8: 1998 and BSEN ISO 717-2: 1997
Emissions (US Carpet & Rug Institute) Meets low VOC emission criteria
Suitable for General Domestic use
Sponge rubber suitable for the stretch-fit installation of carpets
End Use Classification (BS 5808: 1991): GD/U, General Domestic Use
Standard Specifications
Nominal square weight 2712 g/m² (80 oz/yd²) Nominal roll weight 40.86 kg
Roll area 15.07m² (1.37m x 11.00m)
BS 5808: 1991
End Use Classification GD/U, General Domestic Use
Nominal thickness 8.40mm BS 4051
Mean original thickness from nominal thickness (max. 12%) 4.0 % BS 4051
Difference between max. & min. original thickness (max. 3mm) 0.5 mm BS 4051
Work of compression Minimum 50 J/m² 108 J/m² BS 4908 & BS 4052
Retention of work of compression (min 40%) 70 % BS 4908 & BS 4052
Compression after dynamic loading 5.3 mm BS 4908 & BS 4052
Loss in thickness after dynamic loading (max 15%) 6.3 % BS 4052
Loss in thickness after static loading (max 15%) 7.3 % BS 4939
Breaking strength (length/width) min. 40N 182N / 126N BS 2576
Extension under force (length/width) max. 10%@ 40N 2.2% / 1.0%
Resistance to cracking (not greater than 50mm) Pass BS 5808
Flammability
Hot metal nut test Low radius of effects of ignition BS 4790 & BS 5287
Russian GOST FR Test Classification KM5 GOST 30244-94, GOST 30402-96
GOST 51032-97, GOST 12.1.044-89 (item 4.18),
GOST 12.1.044-89 (item 4.20)
Other Specifications
No objectionable odour
Antimicrobial and mildew resistant
Colour / backing Forest green / unprinted Textron® backing
Packaging Green film / green print
Thermal resistance 1.1 togs BS 4745
Impact sound reduction (Delta Lw) 32 dB BSEN ISO 140-8: 1998 and BSEN ISO 717-2: 1997
Emissions (US Carpet & Rug Institute) Meets low VOC emission criteria
Suitable for general domestic use
Sponge rubber suitable for the stretch-fit installation of carpets
End Use Classification (BS 5808: 1991): GD/U,General Domestic Use
Standard Specifications
Nominal square weight 3017 g/m² (89 oz/yd²)
Nominal roll weight 45.5 kg
Roll area 15.07 m² (1.37m x 11.0m)
BS 5808: 1991
End Use Classification GD/U, General Domestic Use
Nominal thickness 8.90 mm BS 4051
Work of compression Minimum 50 J/m² 115 J/m² BS 4908 & BS 4052
Retention of work of compression (min 40%) 73 % BS 4908 & BS 4052
Compression after dynamic loading 6.1 mm BS 4908 & BS 4052
Loss in thickness after dynamic loading (max 15%) 4.6 % BS 4052
Loss in thickness after static loading (max 15%) 5.5 % BS 3939
Resistance to cracking (not greater than 50mm) Pass BS 5808
Flammability
Hot metal nut test (tested in Interfloor laboratory) Low radius of effects of ignition BS 4790 & BS 5287
Russian GOST FR Test Classification KM5 GOST 30244-94, GOST 30402-96
GOST 51032-97, GOST 12.1.044-89 (item 4.18)
GOST 12.1.044-89 (item 4.20)
Other Specifications
No objectionable odour
Antimicrobial and mildew resistant
Colour / backing Green / unprinted Textron® backing
Packaging White film / red print
Thermal resistance 1.32 togs BS 4745
Impact sound reduction (Delta Lw) 38 dB BSEN ISO 140-8: 1998 and BSEN ISO 717-2: 1997
Emissions (US Carpet & Rug Institute) Meets low VOC emission criteria
Suitable for luxury use
Sponge rubber suitable for the stretch-fit installation of carpets
End Use Classification (BS 5808: 1991): L/U, Luxury Use
Standard Specifications
Nominal square weight 3424 g/m² (101 oz/yd²)
Nominal roll weight 37.5 kg (83 lb)
Roll area 10.96 m² (1.37m x 8.0m)
BS 5808: 1991
End Use Classification L/U, Luxury Use
Nominal thickness† 8.75 mm BS 4051
Work of compression Minimum 50 J/m² 143 J/m² BS 4908 & BS 4052
Retention of work of compression (min 40%) 88 % BS 4908 & BS 4052
Compression after dynamic loading 5.1 mm BS 4908 & BS 4052
Loss in thickness after dynamic loading (max 15%) 3.7 % BS 4052
Loss in thickness after static loading (max 15%) 3.3 % BS 3939
Resistance to cracking (not greater than 50mm) Pass BS 5808
Flammability
Hot metal nut test (tested in Interfloor laboratory) Low radius of effects of ignition BS 4790 & BS 5287
Russian GOST FR Test Classification KM5 GOST 30244-94, GOST 30402-96
GOST 51032-97, GOST 12.1.044-89 (item 4.18)
GOST 12.1.044-89 (item 4.20)
Other Specifications
No objectionable odour
Antimicrobial and mildew resistant
Colour / backing Greendale green / printed Textron® backing
Packaging Green film / gold print
Thermal resistance 1.0 togs BS 4745
Impact sound reduction (Delta Lw) 39 dB BSEN ISO 140-8: 1998 and BSEN ISO 717-2: 1997
Emissions (US Carpet & Rug Institute) Meets low VOC emission criteria
Sponge Rubber
Suitable for the stretch-fit installation of carpets
End Use Classification (BS 5808: 1991): GD/U, General Domestic Use
Suitable for heavy contract use
Sponge rubber textured flat suitable for underfloor heating
Suitable for the stretch-fit installation of carpets
End Use Classification (BS 5808: 1991): HC/U, Heavy Contract Use
Standard Specifications
Nominal square weight 3017 g/m² (89 oz/yd²)
Nominal roll weight 45.5 kg (100 lbs)
Roll area 15.07m² (1.33m x 11.33m)
BS 5808: 1991
End Use Classification HC/U, Heavy Contract Use
Nominal thickness 6.10mm BS 4051
Work of compression Minimum 50 J/m² 140 J/m² BS 4908 & BS 4052
Retention of work of compression (min 40%) 85 % BS 4908 & BS 4052
Loss in thickness after dynamic loading (max 15%) 3.5 % BS 4052
Loss in thickness after static loading (max 15%) 4.5 % BS 3939
Breaking strength (length/width) min. 40N 182N / 126N BS 2576
Extension under force (length/width) max. 10%@ 40N 2.2% / 1.0% BS 2576
Resistance to cracking (not greater than 50mm) Pass BS 5808
Flammability
Hot metal nut test (tested in Interfloor laboratory) Pass BS 4790 & BS 5287
Flammability (Methenamine tablet) Pass BS 6307
Critical radiant flux NFPA Class I NFPA 253 / ASTM E648-03
Reaction to fire classification (Tested in conjunction Tested to ENISO9239-1 & with
Brintons Axminster 1028 carpet) Cfl-s1 11925-2, rated to EN13501-1
China National FR Test (at China National Test Centre) Bf1 – s1,t1 GB/T8628-2007, GB/T11785-2005, GB/T20285-2006 Russian GOST FR Test Classification KM3 GOST 30244-94, GOST 30402-96, GOST 51032-97, GOST 12.1.044-89 (item 4.18), GOST 12.1.044-89 (item 4.20)
Other Specifications
No objectionable odour
Antimicrobial and mildew resistant
Colour / backing Green / printed Textron® backing
Packaging White film / purple print
Thermal resistance 0.80 togs BS 4745
Impact sound reduction (Delta Lw) 30dB BSEN ISO 140-8: 1998 and BSEN ISO 717-2: 1997
Emissions (US Carpet & Rug Institute) Meets low VOC emission criteria
Sponge rubber suitable for floating installation of laminate and solid timber floors
Suitable for use with underfloor heating
Standard Specifications
Nominal square weight 2545 g/m² (75 oz/yd²)
Roll area 15.07m² (1.37m x 11.0m)
BS 5808: 1991
Nominal thickness† 3.60mm BS 4051
Work of compression Minimum 50 J/m² 57 J/m² BS 4908 & BS 4052
Retention of work of compression (min 40%) 79 % BS 4908 & BS 4052
Compression after dynamic loading 2.2 mm BS 4908 & BS 4052
Loss in thickness after dynamic loading (max 15%) 4.7 % BS 4052
Loss in thickness after static loading (max 15%) 7.7 % BS 3939
Resistance to cracking (not greater than 50mm) Pass BS 5808
Flammability
Hot metal nut test (tested in Interfloor laboratory) Medium radius of effects of ignition BS 4790 & BS 5287
Acoustic Sone wood/laminate flooring test
Drum sound emission (overall loudness) (Sone) 56 EPLF-Norm 021029-1
Impact sound reduction (Delta Lw) 23dB BSEN ISO 140-8: 1998 and BSEN ISO 717-2: 1997
Other Specifications
No objectionable odour
Antimicrobial and mildew resistant
Colour / backing Black / gold Varpourstop membrane
Packaging Yellow film / green print
Thermal resistance 0.55 togs BS 4745
Emissions (US Carpet & Rug Institute) Meets low VOC emission criteria
Suitable for heavy contract use
Sponge rubber suitable for underfloor heating
Suitable for flame retardant applications
Suitable for the double-stick and stretch-fit installation of carpets and floating wood and laminate installations
End Use Classification (BS 5808: 1991): HC/U, Heavy Contract Use
Standard Specifications
Nominal square weight 2712 g/m² (80 oz/yd²)
Nominal roll weight 40.9 kg (90 lbs)
Roll area 15.07m² (1.35m x 11.16m)
BS 5808: 1991
End Use Classification HC/U, Heavy Contract Use
Nominal thickness 5.00mm BS 4051
Mean original thickness from nominal thickness (max. 12%) 3.0 % BS 4051
Difference between max. & min. original thickness (max. 3mm) 0.4 mm BS 4051
Work of compression Minimum 50 J/m² 96 J/m² BS 4908 & BS 4052
Retention of work of compression (min 40%) 89 % BS 4908 & BS 4052
Compression after dynamic loading 2.2 mm BS 4908 & BS 4052
Breaking strength (length/width) min. 40N 282N / 162N BS 2576
Extension under force (length/width) max. 10%@ 40N 0.8% / 0.5% BS 2576
Loss in thickness after dynamic loading (max 15%) 3.5 % BS 4052
Loss in thickness after static loading (max 15%) 4.0 % BS 4939
Resistance to cracking (not greater than 50mm) Pass BS 5808
Flammability
Hot metal nut test (Not greater than 50mm) Low radius of effects of ignition BS 4790 & BS 5287
Critical radiant flux Category 1 (0.53W/cm²) ASTM E648 / NFPA253
Reaction to fire classification Cfl-s1 Tested to ENISO9239-1 & 11925-2,
(tested in conjunction with Brintons Axminster 1028 carpet) rated to EN13501-1
Russian GOST FR Test Classification KM5 GOST 30244-94, GOST 30402-96
GOST 51032-97, GOST 12.1.044-89 (item 4.18), GOST 12.1.044-89 (item 4.20)
Other Specifications
No objectionable odour
Antimicrobial and mildew resistant
Colour / backing Black / printed Textron® backing
Packaging White film / red print
Thermal resistance 0.56 togs BS 4745
Impact sound reduction (Delta Lw) 28 dB BSEN ISO 140-8: 1998 and BSEN ISO 717-2: 1997
Emissions (US Carpet & Rug Institute) Meets low VOC emission criteria
Suitable for heavy contract
Sponge rubber suitable for underfloor heating
Suitable for flame retardant applications
Suitable for the double-stick and stretch-fit installation of carpets and floating wood and laminate installations
End Use Classification (BS 5808: 1991): HC/U, Heavy Contract Use
Standard Specifications
Nominal square weight 3153 g/m² (93 oz/yd²)
Nominal roll weight 47.5 kg (106 lbs)
Roll area 15.07m² (1.35m x 11.16m)
BS 5808: 1991
End Use Classification HC/U, Heavy Contract Use
Nominal thickness 6.00mm BS 4051
Mean original thickness from nominal thickness (max. 12%) 3.0 % BS 4051
Difference between max. & min. original thickness (max. 3mm) 0.3 mm BS 4051
Work of compression Minimum 50 J/m² 119 J/m² BS 4908 & BS 4052
Retention of work of compression (min 40%) 86 % BS 4908 & BS 4052
Compression after dynamic loading 3.0 mm BS 4908 & BS 4052
Breaking strength (length/width) min. 40N 282N / 162N BS 2576
Extension under force (length/width) max. 10%@ 40N 0.8% / 0.5% BS 2576
Loss in thickness after dynamic loading (max 15%) 3.8 % BS 4052
Loss in thickness after static loading (max 15%) 4.2 % BS 3939
Resistance to cracking (not greater than 50mm) Pass BS 5808
Flammability
Hot metal nut test (Not greater than 50mm) Low radius of effects of ignition BS 4790 & BS 5287
Critical radiant flux Category 1 (0.53W/cm²) ASTM E648 / NFPA253
Reaction to fire classification Cfl-s1 Tested to ENISO9239-1 & 11925-2,
(tested in conjunction with Brintons Axminster 1028 carpet) rated to EN13501-1
Russian GOST FR Test Classification KM5 GOST 30244-94, GOST 30402-96
GOST 51032-97, GOST 12.1.044-89 (item 4.18), GOST 12.1.044-89 (item 4.20)
Other Specifications
No objectionable odour
Antimicrobial and mildew resistant
Colour / backing Black / printed Textron® backing
Packaging Red film / white print
Thermal resistance 0.66 togs BS 4745
Impact sound reduction (Delta Lw) 31 dB BSEN ISO 140-8: 1998 and BSEN ISO 717-2: 1997
Emissions (US Carpet & Rug Institute) Meets low VOC emission criteria
Suitable for heavy contract use
Crumb rubber / felt suitable for the stretch-fit installation of carpets
End Use Classification (BS 5808: 1991): HC/U, Heavy Contract Use
Standard Specifications
Nominal square weight 2500 g/m² (80 oz/yd²)
Nominal roll weight 27.4 kg
Roll area 10.96m² (1.30m x 8.43m)
BS 5808: 1991
End Use Classification HC/U, Heavy Contract Use
Nominal thickness† 11.00mm BS 4051
Work of compression Minimum 50 J/m² 121 J/m² BS 4908 & BS 4052
Retention of work of compression (min 40%) 86 % BS 4908 & BS 4052
Compression after dynamic loading 3.9 mm BS 4908 & BS 4052
Loss in thickness after dynamic loading (max 15%) 6.8% BS 4052
Loss in thickness after static loading (max 15%) 11.1 % BS 3939
Breaking strength (length/width) min. 40N 659N / 1140N BS 2576
Extension under force (length/width) max. 10%@ 40N 5.7 % / 4.5 % BS 2576
Resistance to cracking (not greater than 50mm) Pass BS 5808
Flammability
Hot metal nut test (tested in Interfloor laboratory) Low radius of effects of ignition BS 4790 & BS 5287
Russian GOST FR Test Classification KM5
GOST 30244-94, GOST 30402-96
GOST 51032-97, GOST 12.1.044-89 (item 4.18)
GOST 12.1.044-89 (item 4.20)
Other Specifications
No objectionable odour
Colour / backing Black / grey felt backing
Packaging Red film / silver print
Thermal resistance 1.70 togs BS 4745
Impact sound reduction (Delta Lw) 30 dB
BSEN ISO 140-8: 1998 and BSEN ISO 717-2: 1997
Emissions (US Carpet & Rug Institute) Meets low VOC emission criteria
Sponge rubber suitable for underfloor heating
Suitable for the floating installation of laminate and solid timber floors
Standard Specifications
Nominal square weight 2136 g/m² (63 oz/yd²)
Nominal roll weight 21.4 kg
Roll area 10.00m² (0.685m x 14.60m)
BS 5808: 1991
Nominal thickness 3.00 mm BS 4051
Mean original thickness from nominal thickness (max. 12%) 2.0 % BS 4051
Difference between max. & min. original thickness (max. 3mm) 0.2 mm BS 4051
Work of compression Minimum 50 J/m² 55 J/m² BS 4908 & BS 4052
Retention of work of compression (min 40%) 77 % BS 4908 & BS 4052
Compression after dynamic loading 2.1 mm BS 4908 & BS 4052
Breaking strength (length/width) min. 40N 242N / 106N BS 2576
Extension under force (length/width) max. 10%@ 40N 0.5% / 0.6%
Loss in thickness after dynamic loading (max 15%) 7.2 % BS 4052
Loss in thickness after static loading (max 15%) 12.5 % BS 3939
Breaking strength (length/width) min. 40N 242N / 106N BS 2576
Resistance to cracking (not greater than 50mm) Pass BS 5808
Other Specifications
No objectionable odour
Antimicrobial and mildew resistant
Colour / backing Gold / silver Vapourstop membrane
Packaging Clear, with printed insert
Thermal resistance 0.32 togs BS 4745
Impact sound reduction (Delta Lw) 20 dB BSEN ISO 140-8: 1998 and BSEN ISO 717-2: 1997
Emissions (US Carpet & Rug Institute) Meets low VOC emission criteria
Suitable for general donestic use
Polyurethane rebond suitable for stretch-fit installation of carpets
End Use Classification (BS 5808: 1991): GD/U, General Domestic Use
Standard Specifications
Nominal density 80 kg/m³
Nominal square weight 640 g/m²
Nominal roll weight 9.6 kg
Roll area 15.07m² (1.37m x 11.0m)
BS 5808: 1991
End Use Classification GD/U, General Domestic Use
Nominal thickness 8.00mm BS 4051
Work of compression Minimum 50 J/m² >90 J/m² BS 4908 & BS 4052
Retention of work of compression (min 40%) >70 % BS 4908 & BS 4052
Loss in thickness after dynamic loading (max 15%) <10 % BS 4052
Loss in thickness after static loading (max 15%) <10 % BS 3939
Resistance to cracking (not greater than 50mm) Pass BS 5808
Breaking strength (length/width) min. 40N >70N / >40N BS 2576
Extension under force (length/width) max. 10%@ 40N <10% / <10% BS 2576
Flammability
Hot metal nut test (tested in Interfloor laboratory) Medium radius of effects of ignition BS 4790 & BS 5287
Other Specifications
No objectionable odour
Colour / backing Yellow / nonwoven backing
Packaging Yellow film / black print
Thermal resistance 1.9 togs BS 4745
Impact sound reduction (Delta Lw) 33 dB BSEN ISO 140-8: 1998 and BSEN ISO 717-2: 1997
Emissions ((US Carpet & Rug Institute)) Meets low VOC emission criteria US Carpet & Rug Institute
Suitable for general domestic use
Polyurethane rebond suitable for stretch-fit installation of carpets
End Use Classification (BS 5808: 1991): GD/U, General Domestic Use
Standard Specifications
Nominal density 80 kg/m³
Nominal square weight 800 g/m²
Nominal roll weight 12.10 kg
Roll area 15.07m² (1.37m x 11.0m)
BS 5808: 1991
End Use Classification GD/U, General Domestic Use
Nominal thickness 10.00mm BS 4051
Work of compression Minimum 50 J/m² >115 J/m² BS 4908 & BS 4052
Retention of work of compression (min 40%) >70 % BS 4908 & BS 4052
Loss in thickness after dynamic loading (max 15%) <10 % BS 4052
Loss in thickness after static loading (max 15%) <10 % BS 3939
Resistance to cracking (not greater than 50mm) Pass BS 5808
Breaking strength (length/width) min. 40N >70N / >40N BS 2576
Extension under force (length/width) max. 10%@ 40N <10% / <10% BS 2576
Flammability
Hot metal nut test (tested in Interfloor laboratory) Medium radius of effects of ignition BS 4790 & BS 5287
Other Specifications
No objectionable odour
Colour / backing Beige / nonwoven backing
Packaging Rust film / black print
Thermal resistance 2.4 togs BS 4745
Impact sound reduction (Delta Lw) 38 dB BSEN ISO 140-8: 1998 and BSEN ISO 717-2: 1997
Emissions Meets low VOC emission criteria US Carpet & Rug Institute
Suitable for luxury use
Polyurethane rebond suitable for stretch-fit installation of carpets
End Use Classification (BS 5808: 1991): L/U, Luxury Use
Standard Specifications
Nominal density 80 kg/m³
Nominal square weight 960 g/m²
Nominal roll weight 14.50 kg
Roll area 15.07m² (1.37m x 11.0m)
BS 5808: 1991
End Use Classification L/U, Luxury Use
Nominal thickness 12.00mm BS 4051
Work of compression Minimum 50 J/m² >140 J/m² BS 4908 & BS 4052
Retention of work of compression (min 40%) >70 % BS 4908 & BS 4052
Loss in thickness after dynamic loading (max 15%) <10 % BS 4052
Loss in thickness after static loading (max 15%) <10 % BS 3939
Resistance to cracking (not greater than 50mm) Pass BS 5808
Breaking strength (length/width) min. 40N >70N / >40N BS 2576
Extension under force (length/width) max. 10%@ 40N <10% / <10% BS 2576
Flammability
Hot metal nut test (tested in Interfloor laboratory) Medium radius of effects of ignition BS 4790 & BS 5287
Other Specifications
No objectionable odour
Colour / backing Yellow / nonwoven backing
Packaging Clear, with printed insert
Thermal resistance 2.4 togs BS 4745
Impact sound reduction (Delta Lw) 38 dB BSEN ISO 140-8: 1998 and BSEN ISO 717-2: 1997
Emissions Meets low VOC emission criteria US Carpet & Rug Institute
Suitable for luxury use
Polyurethane rebond suitable for stretch-fit installation of carpets
End Use Classification (BS 5808: 1991): L/U, Luxury Use
Standard Specifications
Nominal density 98 kg/m³
Nominal square weight 1049 g/m²
Nominal roll weight 15.8 kg
Roll area 15.07m² (1.37m x 11.0m)
BS 5808: 1991
End Use Classification L/U, Luxury Use
Nominal thickness 10.00mm BS 4051
Work of compression Minimum 50 J/m² >130 J/m² BS 4908 & BS 4052
Retention of work of compression (min 40%) >70 % BS 4908 & BS 4052
Loss in thickness after dynamic loading (max 15%) <10 % BS 4052
Loss in thickness after static loading (max 15%) <5 % BS 3939
Resistance to cracking (not greater than 50mm) Pass BS 5808
Flammability
Hot metal nut test (tested in Interfloor laboratory) Pass BS 4790 & BS 5287
Other Specifications
No objectionable odour
Colour / backing Orange / printed Textron® backing
Packaging Orange film / black print
Thermal resistance 2.64 togs BS 4745
Impact sound reduction (Delta Lw) 39 dB BSEN ISO 140-8: 1998 and BSEN ISO 717-2: 1997
Emissions (US Carpet & Rug Institute) Meets low VOC emission
Suitable for luxury use
Polyurethane rebond suitable for stretch-fit installation of carpets
End Use Classification (BS 5808: 1991): L/U, Luxury Use
Standard Specifications
Nominal density 110 kg/m³
Nominal square weight 990 g/m²
Nominal roll weight 14.9 kg
Roll area 15.07m² (1.37m x 11.0m)
BS 5808: 1991
End Use Classification L/U, Luxury Use
Nominal thickness 9.00mm BS 4051
Work of compression Minimum 50 J/m² >130 J/m² BS 4908 & BS 4052
Retention of work of compression (min 40%) >70 % BS 4908 & BS 4052
Loss in thickness after dynamic loading (max 15%) <7 % BS 4052
Loss in thickness after static loading (max 15%) <5 % BS 3939
Breaking strength (length/width) min. 40N > 70N / > 40N BS 2576
Extension under force (length/width) max. 10%@ 40N < 10 % / < 10% BS 2576
Resistance to cracking (not greater than 50mm) Pass BS 5808
Flammability
Hot metal nut test (tested in Interfloor laboratory) Low radius of effects of ignition BS 4790 & BS 5287
Other Specifications
No objectionable odour
Colour / backing Red / printed Textron® backing
Packaging Red film / silver print
Thermal resistance 2.69 togs BS 4745
Impact sound reduction (Delta Lw) 41dB BSEN ISO 140-8: 1998 and BSEN ISO 717-2: 1997
Emissions (US Carpet & Rug Institute) Meets low VOC emission criteria
Suitable forluxury use
Polyurethane rebond suitable for stretch-fit installation of carpets
End Use Classification (BS 5808: 1991): L/U, Luxury Use
Standard Specifications
Nominal density 110 kg/m³
Nominal square weight 1210 g/m²
Nominal roll weight 18.2 kg
Roll area 15.07m² (1.37m x 11.0m)
BS 5808: 1991
End Use Classification L/U, Luxury Use
Nominal thickness 11.00mm BS 4051
Work of compression Minimum 50 J/m² >160 J/m² BS 4908 & BS 4052
Retention of work of compression (min 40%) >80 % BS 4908 & BS 4052
Loss in thickness after dynamic loading (max 15%) <5 % BS 4052
Loss in thickness after static loading (max 15%) <5 % BS 4939
Resistance to cracking (not greater than 50mm) Pass BS 5808
Flammability
Hot metal nut test (tested in Interfloor laboratory) Low radius of effects of ignition BS 4790 & BS 5287
Other Specifications
No objectionable odour
Colour / backing Blue / printed Textron® backing
Packaging Blue film / silver print
Thermal resistance 3.13 togs BS 4745
Impact sound reduction (Delta Lw) 44 dB BSEN ISO 140-8: 1998 and BSEN ISO 717-2: 1997
Emissions (US Carpet & Rug Institute) Meets low VOC emission criteria
Suitable for luxury use
Polyurethane rebond suitable for both stretch-fit and double-stick applications
End Use Classification (BS 5808: 1991): L/U, Luxury Use
Standard Specifications
Nominal density 145 kg/m³
Nominal square weight 1595 g/m² (47 oz/yd²)
Nominal roll weight 24.3 kg (53.0 lbs)
Roll area 15.07m² (1.37m x 11.0m)
BS 5808: 1991
End Use Classification L/U, Luxury Use
Nominal thickness 11.00mm BS 4051
Work of compression Minimum 50 J/m² >200 J/m² BS 4908 & BS 4052
Retention of work of compression (min 40%) >90 % BS 4908 & BS 4052
Loss in thickness after dynamic loading (max 15%) <5 % BS 4052
Loss in thickness after static loading (max 15%) <5 % BS 3939
Resistance to cracking (not greater than 50mm) Pass BS 5808
Flammability
Hot metal nut test (tested in Interfloor laboratory) Pass BS 4790 & BS 5287
Other Specifications
No objectionable odour
Colour / backing Green / printed Textron® backing
Packaging Green film / black print
Thermal resistance 2.89 togs BS 4745Impact sound reduction (Delta Lw) 43 dB BSEN ISO 140-8: 1998 and BSEN ISO 717-2: 1997
Emissions (US Carpet & Rug Institute) Meets low VOC emission criteria
Standard Specifications
Nominal density† 145 kg/m3
Nominal square weight † 1595 g/m2
Nominal roll weight† 24 kg
Roll area* 15.07m2 (1.37m x 11.0m)
BS 5808: 1991
End Use Classification L/U, Luxury Use
Nominal thickness† 11.00mm BS 4051
Work of compression Minimum 50 J/m2 >200 J/m2 BS 4908 & BS 4052
Retention of work of compression (min 40%) >80 % BS 4908 & BS 4052
Loss in thickness after dynamic loading (max 15%) <5 % BS 4052
Loss in thickness after static loading (max 15%) <3 % BS 4939
Resistance to cracking (not greater than 50mm) Pass BS 5808
Breaking strength (length/width) min. 40N >70N / >40N BS 2576
Extension under force (length/width) max. 10%@ 40N <10% / <10% BS 2576
Flammability
Hot metal nut test (tested in Interfloor laboratory) Low radius of effects of ignition BS 4790 & BS 5287
Other Specifications
Odour No objectionable odour
Colour / backing Yellow / spunbonded polyester backing
Packaging Yellow film / black print
Thermal resistance 2.9 togs ‡ BS 4745
Impact sound reduction (Delta Lw) 43 dB ‡ BSEN ISO 140-8: 1998 and BSEN ISO 717-2: 1997
Emissions Meets low VOC emission criteria US Carpet & Rug Institute
Standard Specifications
Nominal density† 110 kg/m3
Nominal square weight † 1100 g/m2
Nominal roll weight† 16.6 kg
Roll area* 15.07m2 (1.37m x 11.0m)
BS 5808: 1991
End Use Classification L/U, Luxury Use
Nominal thickness† 10.00mm BS 4051
Work of compression Minimum 50 J/m2 >145 J/m2 BS 4908 & BS 4052
Retention of work of compression (min 40%) >80 % BS 4908 & BS 4052
Loss in thickness after dynamic loading (max 15%) <7 % BS 4052
Loss in thickness after static loading (max 15%) <5 % BS 4939
Resistance to cracking (not greater than 50mm) Pass BS 5808
Breaking strength (length/width) min. 40N >70N / >40N BS 2576
Extension under force (length/width) max. 10%@ 40N <10% / <10% BS 2576
Flammability
Hot metal nut test (tested in Interfloor laboratory) Low radius of effects of ignition BS 4790 & BS 5287
Other Specifications
Odour No objectionable odour
Colour / backing Green/ spunbonded polyester backing
Packaging Green film / black print
Thermal resistance 2.7 togs ‡ BS 4745
Impact sound reduction (Delta Lw) 41 dB ‡ BSEN ISO 140-8: 1998 and BSEN ISO 717-2: 1997
Emissions Meets low VOC emission criteria US Carpet & Rug Institute
Suitable for heavy contract use
Polyurethane rebond suitable for the double-stick and stretch-fit installation of carpets
End Use Classification (BS 5808: 1991): HC/U, Heavy Contract Use
Standard Specifications
Nominal density 145 kg/m³
Nominal square weight 1015 g/m²
Nominal roll weight 15.3 kg
Roll area 15.07m² (1.37m x 11.0m)
BS 5808: 1991
End Use Classification HC/U, Heavy Contract Use
Nominal thickness 7.00mm BS 4051
Work of compression Minimum 50 J/m² >140 J/m² BS 4908 & BS 4052
Retention of work of compression (min 40%) >90 % BS 4908 & BS 4052
Loss in thickness after dynamic loading (max 15%) <5 % BS 4052
Loss in thickness after static loading (max 15%) <5 % BS 3939
Breaking strength (length/width) min. 40N >90N / >50N BS 2576
Extension under force (length/width) max. 10%@ 40N <10% / <10%
Resistance to cracking (not greater than 50mm) Pass BS 5808
Flammability
Hot metal nut test (tested in Interfloor laboratory) Low radius of effects of ignition BS 4790 & BS 5287
Russian GOST FR Test Classification KM5 GOST 30244-94, GOST 30402-96 GOST 51032-97, GOST 12.1.044-89 (item 4.18) GOST 12.1.044-89 (item 4.20)
Other Specifications
No objectionable odour
Colour / backing Orange / printed Textron® backing
Packaging Orange film / black print
Thermal resistance 1.93 togs BS 4745
Impact sound reduction (Delta Lw) 35dB BSEN ISO 140-8: 1998 and BSEN ISO 717-2: 1997
Emissions (US Carpet & Rug Institute) Meets low VOC emission criteria
Suitable for luxury use
Polyurethane rebond suitable for the double-stick and stretch-fit installation of carpets
End Use Classification (BS 5808: 1991): HC/U, Heavy Contract Use
Standard Specifications
Nominal density145 kg/m³
Nominal square weight 1305 g/m²
Nominal roll weight19.7 kg
Roll area 15.07m² (1.37m x 11.0m)
BS 5808: 1991
End Use Classification HC/U, Heavy Contract UseNominal thickness 9.00mm BS 4051
Work of compression Minimum 50 J/m² >140 J/m² BS 4908 & BS 4052
Retention of work of compression (min 40%) >90 % BS 4908 & BS 4052
Loss in thickness after dynamic loading (max 15%) <5 % BS 4052
Loss in thickness after static loading (max 15%) <5 % BS 3939
Breaking strength (length/width) min. 40N >90N / >50N BS 2576
Extension under force (length/width) max. 10%@ 40N <10% / <10%
Resistance to cracking (not greater than 50mm) Pass BS 5808
Flammability
Hot metal nut test (tested in Interfloor laboratory) Low radius of effects of ignition BS 4790 & BS 5287
Other Specifications
No objectionable odour
Colour / backing Violet / printed Textron® backing
Packaging Violet film / black print
Thermal resistance 2.37 togs BS 4745
Impact sound reduction (Delta Lw) 39dB BSEN ISO 140-8: 1998 and BSEN ISO 717-2: 1997
Emissions (US Carpet & Rug Institute) Meets low VOC emission criteria
Liner: Synthetic oil resistant rubber.
Reinforcement: One high tensile steel wire braid.
Cover: Abrasion, ozone & weather resistant synthetic rubber.
Working temperature : 40°C to 100°C
Intermittent temperature: 40°C to +120°C (10% of total working hours).
For air application (max 70°C) & pressure above 17 bar cover must be pin pricked.
Application: Medium to high pressure hydraulic lines. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water-glycol based fluids and air.
Special Features: Qualified for double impulse cycles (300,000 cycles) to relevant standards- SAE 100 R1S AT / EN 853 1SN / ISO 1436-1SN. Good flexibility.
Liner: Synthetic oil resistant rubber
Reinforcement: Two high tensile steel wire braids
Cover: Abrasion, ozone & weather resistant synthetic rubber.
Working temperature : 40°C to 100°C
Intermittent temperature: 40°C to +120°C (10% of total working hours).
For air application (max 70°C) & pressure above 17 bar cover must be pin pricked.
Application: Medium to high pressure hydraulic lines. Suitable Special MSHA approved flame resistant outer cover can be provided on request.
Special Features: Qualified for double impulse cycles (400,000 cycles) to relevant standards SAE 100 R2S AT / EN 853 2SN / ISO 14362SN. Good flexibility.
Liner: Synthetic oil resistant rubber
Reinforcement: Four high tensile steel wire spiral
Cover: High abrasion, ozone & weather resistant synthetic rubber.
Working temperature : 40°C to 100°C
Intermittent temperature: 40°C to +120°C (10% of total working hours).
Application: High pressure, high impulse hydraulic applications eg. excavators, dozers, cranes, compactors,
rock breakers, hydraulic drill rigs and other construction equipment. Suitable for petroleum based hydraulic
fluids, synthetic esters, biodegradable hydraulic fluids, waterglycol based fluids and air.
Special Features: Validated for 1,000,000 impulse cycles exceeding pressure rating of
relevant standards. Good flexibility, weather and ozone resistant. MSHA approved flame resistant cover.
Liner: Thermoplastic technopolymer.
Reinforcement: Two synthetic fibre braids.
Cover: Abrasion resistant black polyurethane.
Working temperature : 40°C to 100°C (40°C to 70°C water & air)
Applications: Medium pressure general hydraulic applications
Hydraulic instrumentation and movable tooling
Liner: Synthetic water resistant rubber
Reinforcement: Two high tensile steel wire braids
Cover: Heat, abrasion, ozone & weather resistant synthetic rubber.
Working temperature : 40°C to 160°C
Pin-pricked cover can be provided on request.
Application: Suitable for Professional Pressure Washer applications up to 160°C.
Special Features: Light weight, high abrasion resistance & excellent resistance to ozone & common detergent solutions. No colour wash off. Conforms to high pressure wash jet machine hose safety requirements as per BS EN 1829. Not recommended for steam service.
Available in range of colours, Black, Blue, Grey,Yellow, Red.
Liner: Synthetic water resistant rubber
Reinforcement: Two high tensile steel wire braids
Cover: Heat, abrasion, ozone & weather resistant synthetic rubber.
Working temperature : 40°C to 160°C
Pin-pricked cover can be provided on request.
Application: Suitable for Professional Pressure Washer applications up to 160°C.
Special Features: Light weight, high abrasion resistance & excellent resistance to ozone & common detergent solutions. No colour wash off. Conforms to high pressure wash jet machine hose safety requirements as per BS EN 1829. Not recommended for steam service.
Available in range of colours, Black, Blue, Grey,Yellow, Red.
Air Hose T520
300 psi air hose manufactured to BS EN ISO2398 + BS5118/2
Cover: Black smooth SBR/NR, with good abrasion and weather resistance.Branding: DH BS EN ISO 2398 + BS5118/2 – 20 Bar – size – year of mfr.
Reinforcement: High tensile synthetic textile plies.
Tube: Black SBR /NR. Oil mist resistant.
Temperature: From -25°C to +70°C
Safety Factor: 3:1 Minimum
Size range and pressures
I.D. O.D. W.P. B.P.
mm mm Bar Bar
6 13 20 60
8 16 20 60
10 18 20 60
13 21 20 64
16 26 20 64
19 29 20 64
25 36 20 64
Heavy Duty Air Hose T620
300psi air hose manufactured to BS EN ISO2398 +BS 5118/2
Cover: Yellow or black SBR, with good abrasion, weather and ageing resistance.
Branding:Thor BS EN ISO 2398 + BS5118/2 Air Hose 20 Bar (Embossed)
Reinforcement: High tensile synthetic textile plies.
Tube: Black SBR, oil mist resistant.
Temperature:-25c +70c
Safety Factor:3:1 Minimum
Size range and pressures
I.D. O.D. W.P. B.P.
mm mm Bar Bar
10 20 20 64
13 23 20 60
16 25 20 60
19 30 20 60
25 37 20 60
32 46 20 60
38 52 20 60
45 60 20 60
51 66 20 60
63 80 20 60
76 93 20 60
102 119 20 60
Air Hose T640
600psi air hose manufactured to BS5118/3 & ISO2398
Cover:Yellow SBR, with good abrasion, weather and ageing resistance.
Branding:Thor BS EN ISO 2398 + BS5118/3
High Pressure Air Hose 40 Bar
Reinforcement:High tensile steel cords..
Tube:Black NBR, oil resistant.
Temperature:-30c +80c
Safety Factor:4:1 Minimum
Size range and pressures
I.D. O.D. W.P. B.P
mm mm Bar Bar
13 25 40 160
19 32 40 160
25 38 40 160
32 46 40 160
38 52 40 160
51 66 40 160
63 80 40 160
76 94 40 16
Medium Duty Water Delivery Hose manufactured to BS5119/A and ISO 1403.
Cover: Black NR/SBR, Abrasion and weather resistant.
Reinforcement: High strength textile plies.
Tube: Black NR/SBR.
Temperature: From -20°C to +70°C
Safety Factor: 3:1 Minimum
Size range and pressures
I.D. O.D. W.P. B.P.
mm mm Bar Bar
19 29 20 64
25 36 20 64
22 32 10 30
25 35 10 30
28 38 10 30
32 42 10 30
35 45 10 30
38 48 10 30
42 52 10 30
45 55 10 30
48 58 10 30
51 61 10 30
55 65 10 30
57 67 10 30
60 70 10 30
63 73 10 30
65 75 10 30
70 80 10 30
73 83 10 30
76 88 10 30
80 90 10 30
90 100 10 30
102 117 10 30
114 125 10 30
127 141 10 30
152 166 10 30
203 216 3.5 11
Heavy duty water suction and delivery hose manufactured to BS1102 : 1977 (1983).
Cover: Black NR/SBR resistant to weather, abrasion and ozone.
Branding: Water S/D W.P. 10 Bar – 150psi yellow stripe. 203mm Plain Black.
Reinforcement: Textile plies, high tensile steel wire helix.
Tube: Black NR/SBR.
Safety Factor: 3 : 1 minimum
Temperature: From -20°C to +70°C
Vacuum: 23ins. / Hg
Size range and pressures
I.D. O.D. W.P. Bend Radius
mm mm Bar mm
25 35 10 152
32 42 10 190
38 48 10 228
45 55 10 267
51 61 10 305
57 69 10 330
63 74 10 381
76 88 10 457
80 92 10 495
90 105 10 533
102 118 10 610
114 131 10 622
152 170 10 915
127 144 10 915
203 222 3.5 1200
Oil suction and delivery hose.
Cover: Black smooth conductive rubber, resistant to weather, abrasion, oil & ozone.
Flame resistant to TRbF-131-Teil 2-5.5
Branding: Logo Oil S/D W.P. 10 bar – 150 psi
Reinforcement: Textile plies, high tensile steel wire helix.
Tube: Black smooth synthetic rubber, resistant to mineral oils and fuels
with max 40% aromatic cntent.
Safety Factor: 3 : 1 minimum
Temperature: From -20°C to +70°C
Vacuum: 80%
Size range and pressures
I.D. O.D. W.P. Bend Radius
mm mm Bar mm
19 29 10 114
25 35 10 152
32 42 10 190
38 48 10 228
45 55 10 267
51 61 10 305
57 69 10 330
60 71 10 355
63 74 10 381
76 88 10 457
90 104 10 533
102 118 10 610
114 132 10 622
127 145 10 635
152 172 10 915
Oil Multi Purpose T920
Multipurpose Fuel Oil and Gasoline Hose, also suitable for use with Air & Water
Cover: Blue smooth CR/NBR, with good abrasion, weather & oil resistance.
Branding: Oil / Multipurpose Hose 20 bar
Reinforcement: High tensile synthetic textile plies.
Tube: Black smooth NBR – resistant to petroleum products with an aromatic content not exceeding 40%.
Temperature: From -30°C to +93°C oil ( +70°C max. with air or water).
Safety Factor: 3:1 Minimum
Size range and pressures
I.D. O.D. W.P. B.P.
mm mm Bar Bar
6 14 20 60
8 15 20 60
10 17 20 60
13 20 20 60
16 26 20 60
19 29 20 60
25 36 20 60
Oil Multi Purpose T910
Multi-purpose oil delivery hose.
Cover: Black CR/NBR rubber, resistant to weather, abrasion, oil and ozone.
Branding: ” – Multipurpose – Oil Delivery 20 Bar” Red Lettering
Reinforcement: High strength textile plies, anti-static wire.
Tube: Black NBR – suitable for oil, greases & various solvents and petroleum products with an aromatic content up to 40%.
Temperature: From -30°C to +70°C
Size range and pressures
I.D. O.D. W.P. B.P.
mm mm Bar Bar
13 23 20 60
16 27 20 60
19 32 20 60
25 38 20 60
32 46 20 60
38 52 20 60
45 61 20 60
51 67 20 60
57 71 20 60
63 79 20 60
76 92 20 6
Food and chemical suction and delivery hose.
Cover: Green EPDM-chemical, ozone and weather resistant rubber.
Branding: UHMWPE CHEMICAL S/D FOOD QUALITY W.P.10 BAR
– 150 psi Made In Italy
Reinforcement: Textile plies, high tensile steel wire helix & anti-static wire.
Tube: UHMWPE – Ultra high molecular weight polyethylene
100% food quality in accordance with FDA requirements.
Safety Factor: 3 : 1 minimum
Temperature: From -20°C to +100°C max, steam sterilising up to 130°C.
Vacuum: 26ins. / Hg
Size range and pressures
I.D. O.D. W.P. Bend Radius
mm mm Bar mm
19 32 10 114
25 38 10 152
32 45 10 190
38 51 10 305
51 65 10 305
63 79 10 381
76 93 10 457
102 123 10 610
Standard duty shotblast hose manufactured to BS5121.
Cover: Black NR with orange stripe. Anti-static abrasion and weather resistant rubber compounds.
Branding: Antistatic Shotblast- 12 bar Orange letters.
Reinforcement: Textile plies.
Tube: Black NR, abrasion resistant and electrically conductive.
Safety Factor: 3 : 1 minimum
Temperature: From -25°C to +70°C
Size range and pressures
I.D. O.D. W.P.
mm mm Bar
13 29 12
19 35 12
25 40 12
32 48 12
38 56 12
51 71 12
63 81 12
65 85 12
Heavy duty shotblast hose manufactured to BS5121.
Cover: Black NR Anti-static abrasion and weather resistant rubber compounds.
Branding: Antistatic Shotblast- 12 bar Orange Lettering
Reinforcement: Textile plies.
Tube: Black NR, abrasion resistant and electrically conductive.
Safety Factor: 3 : 1 minimum
Temperature: From -25°C to +70°C
Size range and pressures
I.D. O.D. W.P.
mm mm Bar
13 32 12
16 35 12
19 38 12
25 47 12
28 45 12
32 54 12
38 60 12
45 61 12
51 73 12
57 77 12
60 80 12
Hot Water T303
Hot Water Dairy Washdown Hose
Cover: Drab White NR / SBR. Non marking, abrasion and weather resistant.
Reinforcement: High tensile synthetic textile plies.
Tube: White NR / SBR.
Temperature: From -20°C to +120°C
Safety Factor: 3:1 Minimum
Size range and pressures
I.D. O.D. W.P. B.P.
mm mm Bar Bar
5 14 10 30
13 23 10 30
19 31 10 30
Steam Hose T307
Steam Hose manufactured to BS 5122 Type A2 and ISO 6134.
Cover: White EPDM – non marking rubber, excellent resistance to ageing and weathering.
Also available in black.
Branding: TT/BS5122/1986/A2/100psi/170c/Steam Hose/Drain After Use.
Reinforcement: High strength nylon plies.
Tube: Black EPDM compounded to withstand steam up to 170c.
Temperature: From -25°C to +170°C
Safety Factor: 10:1 Minimum
Size range and pressures
I.D. O.D. W.P. B.P.
mm mm Bar Bar
13 25 7 70
16 28 7 70
19 31 7 70
25 38 7 70
32 46 7 70
38 54 7 70
51 68 7 70
Superheated Steam Hose T317
Superheated Steam Hose manufactured to BS 5342 Type 2A
Cover: Red EPDM, excellent resistance to ageing & weathering. Also available with a black cover.
Branding: TT BS5342 2A year 17 bar – 250 psi size 232°C – 450F
Drain after use
Reinforcement: Spiral wire plies.
Tube: Black EPDM compounded to withstand steam up to 232°C.
Temperature: From -20°C to +232°C
Safety Factor: 10:1 Minimum
Size range and pressures
I.D. O.D. W.P. B.P.
mm mm Bar Bar
13 25 17 170
19 31 17 170
25 37 17 170
32 46 17 170
38 52 17 170
51 66 17 170
63 81 17 170
76 96 17 170
102 124 17 170
Brewers delivery hose.
Cover: Orange NR/SBR – Abrasion and weather resistant, totally non-conductive.
Branding: ” Brewers Delivery – WP 10 bar 150 PSI Made In Italy.
Reinforcement: Textile plies.
Tube: Red NR/SBR – FDA approved, non toxic, non tainting and non conductive rubber.
Safety Factor: 3 : 1 minimum
Temperature: From -20°C to 80°C with an intermittent steam sterilising temperature up to 120°C.
Size range and pressures
I.D. O.D. W.P.
mm mm Bar
10 20 10
13 24 10
16 30 10
19 31 10
25 37 10
32 46 10
35 49 10
38 52 10
45 59 10
51 67 10
57 74 10
63 81 10
76 92 10
102 122 10
Oxygen Hose
Oxygen hose manufactured to EN 559
Cover: Blue NR/SBR. Abrasion and weather resistant.
Branding: EN559 / 2 Mpa (20 bar) / size / D H / year
Reinforcement: High tensile synthetic textile plies.
Tube:Black NR/SBR.
Temperature:-20c +70c
Safety Factor:3:1 Minimum
Size range and pressures
I.D. O.D. W.P. B.P.
mm mm Bar Bar
6 14 20 60
8 16 20 60
10 18 20 60
13 21 20 60
Acetylene Hose
Acetylene hose manufactured to EN559
Cover: Red NR/SBR. Abrasion and weather resistant.
Branding: EN559 / 2 Mpa (20 bar) / size / D H / Year
Reinforcement: High tensile synthetic textile plies.
Tube: Black NR/SBR.
Temperature:-20c +70c
Safety Factor:3:1 Minimum
Size range and pressures
I.D. O.D. W.P. B.P.
mm mm Bar Bar
6 14 20 60
8 16 20 60
10 18 20 60
Argon Hose
Argon hose manufactured to EN559
Cover:Black NR/SBR. Abrasion and weather resistant.
Branding:EN559 / 2 MPa (20 bar) / size / DH / year
Reinforcement:High tensile synthetic textile plies.
Tube:Black NR/SBR.
Temperature:-20c +70c
Safety Factor:3:1 Minimum
Size range and pressures
I.D. O.D. W.P. B.P.
mm mm Bar Bar
6 13 20 60
8 16 20 60
10 18 20 60
Propane hose manufactured to EN559
Cover:Orange NBR/SBR. Abrasion, oil and weather resistant.
Branding:EN559 / 2 Mpa (20 bar) / size / D H / year
Reinforcement:High tensile synthetic textile plies.
Tube:Black NBR, resistant to oil products, L.P.G. and propane.
Temperature:-20c +70c
Safety Factor:3:1 Minimum
Size range and pressures
I.D. O.D. W.P. B.P.
mm mm Bar Bar
5 13 20 60
6 14 20 60
8 16 20 60
10 18 20 60
13 21 20 60
First Aid Fire Reel Hose manufactured to BS3169a.
Cover:Red SBR, Abrasion and weather resistant.
Branding:BS3169/A WP 15 Bar size
Reinforcement:High strength textile plies.
Tube:Black SBR.
Safety Factor:3:1 Minimum
Size range and pressures
I.D. O.D. W.P. B.P.
mm mm Bar Bar
19 29 10 30
25 36 10 30
Cover: Black smooth EPDM, with good heat, ozone and weather resistance.
Branding: DH Car Heater Hose SAE J20 R3 Size (Size mm)
Reinforcement: High tensile synthetic textile plies.
Tube: Black EPDM suitable for ethylene glycol solutions.
Temperature: From -30°C to +110°C (peaking to 120°C)
Safety Factor: 3:1 Minimum
Size range and pressures
I.D. O.D. W.P. B.P.
mm mm Bar Bar
10 17 10 30
13 21 10 30
16 24 10 30
19 27.5 10 30
22 31 10 30
25 34 10 30
Description
XL is a lightweight version of our HN Clear Braided PVC hose with a reduced wall thickness. XL Clear Braided PVC hose is suitable for less arduous applications than our HN braided PVC hose. Manufactured from FDA approved ingredients, XL Clear Braided PVC hose is suitable for food contact applications. It is resistant to a wide range of chemicals. Minimum frictional loss is achieved by the smooth bore.
Applications
XL can be used to convey many liquids and gases under pressure. Applications include factory air lines, pneumatic equipment & general workshop use.
Construction
Two layers of clear flexible PVC bonded together encapsulating high tensile polyester fibres.
Applica le Standards BS EN ISO 6224 and BS EN ISO 5774.
Special Features
Optimum flow is maintained by the smooth bore.
Excellent transparency enabling blockages to be located.
Highly flexible Good resistance to a wide range of chemicals.
Non-toxic suitable for food use.
Colour
Standard – Clear
Size Range
3mm to 50mm ID
(1/8” to 2”)
Standard Length
30 metres / supplied in a coil
Subject to minimum order quantity, longer lengths are available to order.
Temperature Range
-10°C to +65°C in accordance with BS EN ISO 6224 and BS EN ISO 5774
Description
A lightweight PVC hose, reinforced with high tensile polyester fibres. HN braided PVC Hose is tough, flexible and extremely durable under normal operating conditions. Manufactured from materials containing FDA approved ingredients, HN braided PVC hose is suitable for food applications. It is resistant to a wide range of chemicals. Minimum frictional loss is achieved by the smooth bore.
Application
HN can be used to convey many liquids and gases under pressure. Applications include factory air lines, pneumatic equipment & general workshop use.
Construction
Two layers of clear flexible PVC bonded together encapsulating high tensile polyester fibres.
Special Features
Optimum flow is maintained by the smooth bore.
Excellent transparency, enabling blockages to be located.
Highly flexible.
Good resistance to a wide range of chemicals.
Non toxic suitable for food use.
Manufactured to comply with ISO 5774, BS6066:1981 & BS EN ISO 6224 :1997
Colours
Standard – Clear
Red, Blue & Black available HN30 to HN90
Other colours available subject to minimum order
Size Range
3/16” to 2”
Standard Length
30 metres supplied in a coil
Subject to minimum order quantity, longer lengths are available to order.
Temperature Range
-15°C to +65°C in accordance withBS EN ISO 6224 and BS EN ISO 5774
Description
MH clear PVC tubing is manufactured from materials containing FDA approved ingredients and is suitable for food applications. MH tubing is resistant to a wide range of chemicals. Minimum frictional loss is achieved by the smooth bore.
Applications
MH tubing is extremely versatile and can be used in a wide range of low pressure applications including the transfer of liquids, acids, gasses & foodstuffs.
Construction
Clear unreinforced flexible PVC
Special Features
Optimum flow is maintained by the smooth bore. Tough, flexible and extremely durable under normal operating conditions. Flexibility maintained even under cold weather conditions. Non toxic suitable for food use.
Colour
Standard – Clear
Subject to minimum order quantity, colours & tints are available to order.
Size Range
1/8” – 2”
Standard Length
30 metres supplied in a coilSubject to minimum order quantity, longer or shorter lengths are available to order.
Description
The all purpose water hose range offers outstanding low temperature characteristics combined with flexibility and has been designed for the professional.
Applications
Suitable for general purpose water applications, including sports grounds, agricultural, horticultural and domestic garden applications.
Construction
Two layers of smooth PVC bonded together.
Special Features
Professional quality PVC water hose with braided textile reinforcement for added strength.Suitable for general purpose water applications, including sports grounds, agricultural and horticultural applications.Made from abrasion resistant PVC compounds.
High flexibility. Silicone free. Abrasion resistance – good.
Made from Cadmium free materials. Kink resistance – good. Outstanding all year round flexibility. Polyester fibre reinforcement.
Colour
Standard – Clear
Subject to minimum order quantity, colours & tints are available to order.
Size Range
1/8” – 2”
Standard Length
30 metres supplied in a coilSubject to minimum order quantity, longer or shorter lengths are available to order.
Description
A lightweight PVC hose, reinforced with a semi-rigid crush resistant white PVC helix. It is tough, flexible and extremely durable under normal operating conditions. It has outstanding resistance to the effects of weather.
Minimum frictional loss is achieved by the smooth bore.
Applications
Delivery and light duty suction of water, slurries and powders. This product is particularly popular in the agricultural, horticultural, marine and construction industries. Within the agricultural industry the hose is specifically used for conveying liquid fertilisers, dilute chemicals and insecticides.
Construction
White rigid crush resistant anti-shock PVC spiral helix encapsulated in a flexible PVC cover, with a smooth inside wall.
Special Features
Optimum flow is maintained by the smooth bore.
Tough, flexible and extremely durable under normal operating conditions.
Flexibility maintained even under cold weather conditions.
Outstanding resistance to the effects of weather .
Colour
Standard – Transparent Green, White Helix
Transparent Yellow, White Helix
Size Range
1” to 2”
Standard Length
30 metres supplied in a coil
Temperature Range
-15°C to +65°C
Description
A lightweight PVC hose, reinforced with a semi-rigid crush resistant white PVC helix. It is tough, flexible and extremely durable under normal operating conditions. It has outstanding resistance to the effects of weather. Minimum frictional loss is achieved by the smooth bore.
Applications
Delivery and light duty suction of water, slurries and powders. This product is particularly popular in the agricultural, horticultural, marine and construction industries. Within the agricultural industry the, hose is specifically used for conveying liquid fertilisers, dilute chemicals and insecticides.
Construction
White rigid crush resistant anti-shock PVC Spiral helix encapsulated in a flexible PVC cover, with a smooth inside wall.
Special Features
Optimum flow is maintained by the smooth bore.
Tough, flexible and extremely durable under normal operating conditions.
Flexibility maintained even under cold weather conditions.
Outstanding resistance to the effects of weather .
Colour
Standard – Transparent Green, White Helix
Transparent Yellow, White Helix
Black, White Helix
Size Range
30 metres supplied in a coil
Temperature Range
-10°C to +55°C
Description
A medium weight PVC hose, reinforced with a semi-rigid crush resistant white PVC helix. It is tough, flexible and extremely durable under normal operating conditions. It has outstanding resistance to the effects of weather. Minimum frictional loss is achieved by the smooth bore.
Applications
Suction and delivery of water, sewage, slurries and powders. This product is particularly popular in the agricultural, construction & general manufacturing industries.
Construction
White rigid crush resistant anti-shock PVC Spiral helix encapsulated in an olive green flexible PVC cover, with a smooth inside wall.
Special Features
Optimum flow is maintained by the smooth bore.
Tough, flexible and extremely durable under normal operating conditions.
Flexibility maintained even under cold weather conditions.
Outstanding resistance to the effects of weather .
Colour
Standard – Olive Green, White Helix
Size Range
1” to 10”
Standard Length
Up to 6”, 30 metres supplied in a coil
Over 6”, 10 metres supplied in a straight length
Also available in straight lengths with couplings if required.
Temperature Range
-10°C to +65°C
Description
A heavy duty PVC hose, reinforced with a semi-rigid crush resistant white PVC helix. Designed to operate under severe working conditions, this hose is tough, flexible and extremely durable under normal operating conditions. It has outstanding resistance to the effects of weather. Minimum frictional loss is achieved by the smooth bore.
Applications
Suction and delivery of water, sewage, slurries and powders. This product is particularly popular in the agricultural, construction & for general industrial applications. Heavy duty suction hose is supplied in straight lengths with polished aluminium alloy couplings for fire brigade applications.
Construction
White rigid crush resistant anti-shock PVC Spiral helix encapsulated in a dark green flexible PVC cover, with a smooth inside wall.
Special Features
Optimum flow is maintained by the smooth bore.
Robust, heavy duty construction.
Withstands a full vacuum.
Outstanding resistance to the effects of weather.
Colour
Standard – Dark Green, White Helix
Grey, White Helix
Size Range
1” to 10”
Standard Length
Up to 6”, 30 metres supplied in a coil
Over 6”, 10 metres supplied in a straight length
Also available in straight lengths with couplings if required
Temperature Range
-10°C to +55°C
Description
A lightweight clear non-toxic PVC hose, reinforced with a semi-rigid crush resistant white PVC helix. It is tough, flexible and extremely durable under normal operating conditions. It has outstanding resistance to the effects of weather. Minimum frictional loss is achieved by the smooth bore.
Applications
Delivery and light duty suction of water, slurries and powders. This product is particularly popular in the agricultural, horticultural, marine and construction industries. Within the agricultural industry the hose is specifically used for conveying liquid fertilisers, dilute chemicals and insecticides.
Construction
White rigid crush resistant anti-shock PVC Spiral helix encapsulated in a transparent flexible PVC cover, with a smooth inside wall.
Special Features
Optimum flow is maintained by the smooth bore.
Tough, flexible and extremely durable under normal operating conditions.
Flexibility maintained even under cold weather conditions.
Transparent wall allows easy identification of contents.
Colour
Standard – Transparent, White Helix
Size Range
1”to 4”
CUFG available up to 6”
Standard Length
30 metres supplied in a coil
Temperature Range
-10°C to +55°C
Description
Wireflex is an extremely tough and flexible non toxic transparent PVC hose, allowing easy identification of blockages. UV compounded to maintain clarity. Excellent resistance to pressure, vacuum, abrasion and accidental crushing with accurate pitch and placement of high tensile carbon steel helix preventing bulging and bursting. Highly flexible over a wide temperature range. Smooth bore reduces flow loss.
Applications
Suitable for the suction and delivery of water, slurries, granules, foodstuffs and dilute chemicals. Wireflex is ideally suited to applications in the agricultural, food processing, plastics handling , marine & construction industries. flex is UV compounded to resist atmospheric conditions and is ideally suited to external applications.
Construction
High tensile carbon steel wire encapsulated in transparent non-toxic flexible PVC.
Special Features
Low toxicity – suitable for food use
Resistant to full vacuum
UV compounded to maintain clarity
Can be ‘knocked back’ if flattened
Optimum flow is maintained by the smooth bore
Anti-static feature
Tough, flexible and extremely durable undernormal operating conditions
Colour
Clear. Other colours are available subject to minimum order quantity
Size Range
1/2” to 6”
Standard Length
13mm -127mm – 30 metres
152mm – 20 metres
Other coil lengths available subject to minimum order quantity
Temperature Range
-10°C to +65°C
Description
A medium weight PVC ducting hose, reinforced with a semi-rigid crush resistant white PVC helix. It is tough, flexible and extremely durable under normal operating conditions. The cross section is maintained even when highly flexed. Minimum frictional loss is achieved by the smooth bore.
Applications
Ideally suited to arduous applications on industrial vacuum cleaners and for the extraction of fumes, wood chippings & sawdust.
Construction
White rigid crush resistant anti-shock PVC Spiral helix encapsulated in an dark green flexible PVC cover, with a smooth inside wall.
Special Features
Optimum flow is maintained by the smooth bore.
Tough, flexible and extremely durable under normal operating conditions.
Crush resistant helix.
Cross section maintained even when highly flexed.
Colour
Standard – Dark Green, White Helix
Grey available on request
Size Range
1”to 6”
Standard Length
30 metres supplied in a coil
Temperature Range
-10°C to +65°C
Description
A medium weight PVC ducting hose, reinforced with a PVC coated spring steel helix. VHW ducting is extremely flexible and durable under normal operating conditions. The cross section is maintained even when highly flexed.
Applications
VHW ducting is suitable for the extraction of fumes, air and dust. Also suitable for applications in the automotive industry.
Construction
Flexible PVC ducting reinforced with a PVC coated spring steel helix.
Special Features
Highly flexible, can be used in confined spaces.
Cross section maintained even when highly flexed.
Colour
Standard – Grey
Size Range
1”to 6”
Standard Length
10 metres supplied in a coil
Temperature Range
-10°C to +65°C
Description
High flexibility PVC ducting hose, reinforced with a semi-rigid crush resistant white PVC helix. It is tough, flexible and extremely durable under normal operating conditions. The cross nsection is maintained even when highly flexed. Minimum frictional loss is achieved by the smooth bore.
Applications
Suitable for use in applications on industrial vacuum cleaners and for the extraction of fumes, wood chippings & sawdust.
Construction
White rigid crush resistant anti-shock PVC spiral helix encapsulated in a dark grey flexible PVC cover, with a smooth inside wall.
Special Features
Optimum flow is maintained by the smooth bore.
Tough, flexible and extremely durable undernormal operating conditions.
Crush resistant helix.
Cross section maintained even when highly flexed,
Colour
Standard – Dark Grey, White Helix
Size Range
1” to 10”
Standard Length
25mm -152mm – 30 metres
152mm -254mm – 10 metres
Other coil lengths available subject to minimum order quantity
Temperature Range
-15°C to +65°C
Description
Manufactured from a compound containing nitrile, offering excellent flexibility & kink resistance, this hose is designed for the transportation of fuel oils. Minimum frictional loss is achieved by the smooth bore.
Applications
Delivery of fuel oils with a low aromatic content including oil, diesel, kerosene, white spirit & mineral based hydraulic oils.
Construction
Two layers of nitrile PVC bonded together encapsulating high tensile polyester fibres.
Special Features
Excellent abrasion resistance
Outstanding resistance to ageing
Highly Flexible
Kink resistant
Good resistance to a wide range of chemicals
Colour
Standard – Black
Size Range
3/4” & 1”
Standard Length
50 metres supplied in a coil
Subject to minimum order quantity, longer lengths are available to order
Temperature Range
-15°C to +65°C
Description
Manufactured from abrasion resistant PVC, offering excellent flexibility & kink resistance, this hose is a highly versatile reinforced PVC hose capable of working at 20 Bar.
Applications
Suitable for use in the construction & heavy engineering industries
Construction
Two layers of PVC bonded together encapsulating high tensile polyester fibres.
Special Features
Excellent abrasion resistance
Outstanding resistance to ageing
Highly flexible
Kink resistant
Good resistance to a wide range of chemicals
Colour
Standard – Yellow Cover, Black Liner
Size Range
3/4” & 1”
Standard Length
30 metres / supplied in a coil
Also available in 15 metre assemblies with quick release safety couplings if required
Temperature Range
-15°C to +65°C
Band: BS 1449 Pt. 1
Housing: BS 1449 Pt. 1
Screw: BS 3111
Zinc Finish: Meets BS 7479 48 hrs NSS
2-Ear clamp widely used for maintenance and OEM applications. Mainly used on air, fluid, gas and steam lines, also suitable for low pressure hydraulic applications. Ideal for where the requirement is for a neat finish with no bulky housing to catch on obstructions. Pincers are used to crimp the ears of the clamps and affect a proper seal.
Small nut and bolt clips used mainly in the motor trade for securing petrol pipes, heater hoses and small bore applications etc. Manufactured in both zinc plated mild steel and 304 stainless steel with a standard 7mm hexagon headed screw.
Tightening Torque: Maximum 1.2 Nm
Screw: 7mm A/F
Material: Zinc finished mild steel
304 Stainless steel
Part No. Adjustment
NB 0709 07-09mm
NB 0810 08-10mm
NB 0911 09-11mm
NB 1012 10-12mm
NB 1113 11-13mm
NB 1214 12-14mm
NB 1315 13-15mm
NB 1416 14-16mm
NB 1517 15-17mm
NB 1618 16-18mm
NB 1820 18-20mm
Also available in Stainless Steel, from sizes 07-09mm – 14-16mm
High precision tools specifically designed for efficient, rapid and easy adjustment of Jubilee clips to their optimum torque. The invaluable Flexidriver with flexible shaft has been designed to reach all those awkward places while the Clipdriver has a rigid shaft Jubilee Flexidriver® – flexible shaft tool for efficient and rapid adjustment of Jubilee clips
Jubilee Clipdriver® – rigid shaft tool for easy adjustment of Jubilee clips. Available in 95mm & 160mm lengths.
Stikatak adhesives are manufactured in Haslingden. They produces a range of high quality, environmentally friendly, low VOC adhesives and there R&D and Technical teams ensure that there products are suitable for use with the latest trends in floor coverings and health and safety requirements.
MSDS/COSHH and technical data sheets for all adhesives are available upon request.
Spray & Cartridge Adhesives
Gripperrods® tapes are manufactured in a UK factory in a quality controlled environment, which ensures the very high standards that have made Gripperrods® the market leader in this product sector. All tapes feature a woven scrim with a glass fibre weft and a polyester warp. The glass fibre gives maximum strength across the seam, The polyester allows some stretch along the length but none along the width as the glass fibre ensures stability. We offer a range of different specification tapes to suit your various requirements. All are designed to give a strength of finished seam in excess of British Standards. The finished seam strength will also depend on selecting the right tape for the job and using the best of tools.
Standard
This tape is designed for use in the fitting of felt backed carpets. The lower melt temperature of the adhesive prevents damage to the carpet backing. The ribbed adhesive profile is designed specifically for use with the Super Heat Seam Iron. This enables the tape to be centred automatically and ensures that the exact amount of adhesive is delivered for seam sealing. This tape also provides a lower cost alternative to Multiline tape for seaming conventional woven or secondary jute backed carpets in light traffic areas.
Backing width: 90mm
Adhesive width: 60mm
TX6702B
20m x 10 Per Carton
Multiline
Designed for traditional backed carpets installed in moderate traffic areas.
Backing width: 90mm
Adhesive width: 60mm
TX6712B
20m x 10 per carton
Seamwell
This tape offers an adhesive formulation and weight designed for high traffic installations and particularly for more difficult backings such as Action-Bac. The adhesive system is designed specifically to achieve good overall contact with these more rigid, uneven textured backings
Backing width: 90mm
Adhesive width: 60mm
TX6734B
20m x 10 Per Carton
Gripperrods® tapes are manufactured in a UK factory in a quality controlled environment, which ensures the very high standards that have made Gripperrods® the market leader in this product sector. All tapes feature a woven scrim with a glass fibre weft and a polyester warp. The glass fibre gives maximum strength across the seam, The polyester allows some stretch along the length but none along the width as the glass fibre ensures stability. We offer a range of different specification tapes to suit your various requirements. All are designed to give a strength of finished seam in excess of British Standards. The finished seam strength will also depend on selecting the right tape for the job and using the best of tools.
Standard
This tape is designed for use in the fitting of felt backed carpets. The lower melt temperature of the adhesive prevents damage to the carpet backing. The ribbed adhesive profile is designed specifically for use with the Super Heat Seam Iron. This enables the tape to be centred automatically and ensures that the exact amount of adhesive is delivered for seam sealing. This tape also provides a lower cost alternative to Multiline tape for seaming conventional woven or secondary jute backed carpets in light traffic areas.
Backing width: 90mm
Adhesive width: 60mm
TX6702B
20m x 10 Per Carton
Multiline
Designed for traditional backed carpets installed in moderate traffic areas.
Backing width: 90mm
Adhesive width: 60mm
TX6712B
20m x 10 per carton
Seamwell
This tape offers an adhesive formulation and weight designed for high traffic installations and particularly for more difficult backings such as Action-Bac. The adhesive system is designed specifically to achieve good overall contact with these more rigid, uneven textured backings
Backing width: 90mm
Adhesive width: 60mm
TX6734B
20m x 10 Per Carton
Carpet Gripper
Gripper has a 20mm strip with a pronounced bevel edge and is made of 5 ply Poplar plywood, which gives a good quality alternative to Russian Birch plywood. The zinc plated nails and galvanised pins are precision made to hold in any sub-floor and give the carpet holding strength required. Available with wood,concrete and dual purpose nails and medium pin.
Pre-Nailed for wood floors
Pre-nailed for ease and speed of installation when fitted to boarded or suspended timber floors, with specially tempered nails (threaded for holding power), pre-driven into the gripper. 20mm wide strip. There is 152mtr (500 foot) per box.
Grippercrete
Designed for ease of installation on concrete floors. Pre-nailed with high quality masonry nails for a firm fixing. 20mm wide strip. There is 152mtr (500 foot) per box.
Dual Purpose
Pre-nailed with dual purpose nails. Suitable for most wood and concrete based floors. There is 152mtr (500 foot) per box
Contract Gripper
Gripperrods Contract gripper is manufactured in the UK from 5 ply Russian Birch plywood and is a specialist product for particularly heavy stretch installations. It is 42mm wide and has 3 rows of carpet holding pins compared to the two rows in other gripper specifications. It is available in medium pin height only and without floor nails. This allows the fitter to install by nailing or adhering the gripper to the floor, depending on the installation.
There is 76mtr (250 foot) per box.
Single Sided Tapes
Double Sided Tapes
Vapour Barrier Tapes
Floor stripping & Preparation
Adhesive & Screed Applications
Cutting & Trimming
Cutting Blades
Measuring & Fixing
Stretching, Creasing & Tucking
Heat Seaming
The Huntress Wellington boot is a durable design , handcrafted from a new soft rubber compound, features a lower leg length and wider calf for maximum comfort
Sizes Available:
4-5-6-7-8-12
Details:
Specification:
Features:
Price:
€85 + VAT @ 23%
Delivery:
By courier is €10 & is next day as long as order is placed before noon
The Hunter Wellington boot is a durable design , handcrafted from a new soft rubber compound, features a lower leg length and wider calf for maximum comfort
Sizes Available:
4-5-6-7-8-12
Details:
Specification:
Features:
Price:
€85 + VAT @ 23%
Delivery:
By courier is €10 & is next day as long as order is placed before noon
Sponge Rubber
Suitable for the stretch-fit installation of carpets
End Use Classification (BS 5808: 1991): GD/U, General Domestic Use
Sponge Rubber
Suitable for stretch-fit installation of carpets
End Use Classification (BS 5808: 1991): L/U, Luxury Use
EW310 All In One Blue underlay
Features:
• Integral water vapour barrier
• Integral self adhesive fixing tape
• Light strong and flexible
• 100% LDPE product, fully recyclable
• Suitable for underfloor heating systems
• Easy to handle and install
• Smooths irregular surfaces
• Excellent impact sound reduction
• Excellent thermal and shock insulation qualities
Roll size 10m x 1m
Rolls per pack 8
Thickness 3mm
Impact sound reduction ∆Lw = 19dB
Water vapour barrier 96m
Thermal resistance 0.057m2 K/W
Compressive strength 6 kPa
Polyurethane Rebond
Suitable for stretch-fit installation of carpets
End Use Classification (BS 5808: 1991): L/U, Luxury Use
Standard Specifications
Nominal density† 98 kg/m³
Nominal square weight† 1049 g/m²
Nominal roll weight† 15.8 kg
Roll area* 15.07m² (1.37m x 11.0m)
BS 5808: 1991
End Use Classification L/U, Luxury Use
Nominal thickness 10.00mm BS 4051
Work of compression Minimum 50 J/m² >130 J/m² BS 4908 & BS 4052
Retention of work of compression (min 40%) >70 % BS 4908 & BS 4052
Loss in thickness after dynamic loading (max 15%) <10 % BS 4052
Loss in thickness after static loading (max 15%) <5 % BS 4939
Resistance to cracking (not greater than 50mm) Pass BS 5808
Flammability
Hot metal nut test (tested in Interfloor laboratory) Pass BS 4790 & BS 5287
Other Specifications
Odour – No objectionable odour
Colour – / backing Orange / nonwoven backing
Packaging – Orange film / black print
Thermal resistance – 2.64 togs BS 4745
Impact sound reduction (Delta Lw) – 39 dB BSEN ISO 140-8: 1998 and BSEN ISO 717-2: 1997
Emissions (US Carpet & Rug Institute) – Meets low VOC emission criteria
Polyurethane Rebond
Suitable for stretch-fit installation of carpets
End Use Classification (BS 5808: 1991): L/U, Luxury Use
Standard Specifications
Nominal density† 98 kg/m³
Nominal square weight† 882 g/m²
Nominal roll weight† 13.30 kg
Roll area* 15.07m² (1.37m x 11.0m)
BS 5808: 1991
End Use Classification L/U, Luxury Use
Nominal thickness 9.00mm BS 4051
Work of compression Minimum 50 J/m² >120 J/m² BS 4908 & BS 4052
Retention of work of compression (min 40%) >70 % BS 4908 & BS 4052
Loss in thickness after dynamic loading (max 15%) <10 % BS 4052
Loss in thickness after static loading (max 15%) <10 % BS 4939
Resistance to cracking (not greater than 50mm) Pass BS 5808
Breaking strength (length/width) min. 40N >70N / >40N BS 2576
Extension under force (length/width) max. 10%@ 40N <10% / <10% BS 2576
Flammability
Hot metal nut test (tested in Interfloor laboratory) Low radius of effects of ignition BS 4790 & BS 5287
Other Specifications
Odour – No objectionable odour
Colour – / backing Turquoise / spunbonded polyester backing
Packaging – Turquoise film / black print
Thermal resistance – 2.4 togs ‡ BS 4745
Impact sound reduction (Delta Lw) – 35 dB ‡ BSEN ISO 140-8: 1998 and BSEN ISO 717-2: 1997
Emissions – Meets low VOC emission criteria US Carpet & Rug Institute
Polyurethane Rebond
Suitable for stretch fit and double stick* installations of carpets (*for areas up to 30m2)
End Use Classification (BS 5808: 1991): LU, Luxury Use
Standard Specifications
Nominal density† 160 kg/m³
Nominal square weight † 1700 g/m²
Nominal roll weight† 25.6 kg
Roll area* 15.07m² (1.37m x 11.0m)
BS 5808: 1991
End Use Classification L/U, Luxury Use
Nominal thickness† 9.00mm BS 4051
Work of compression Minimum 50 J/m² >140 J/m² BS 4098 & BS 4052
Retention of work of compression (min 40%) >90 % BS 4098 & BS 4052
Loss in thickness after dynamic loading (max 15%) <5 % BS 4052
Loss in thickness after static loading (max 15%) <5 % BS 4939
Breaking strength (length/width) min. 40N >90N / >50N BS 2576
Extension under force (length/width) max. 10%@ 40N <10% / <10%
Resistance to cracking (not greater than 50mm) Pass BS 5808
Flammability
Hot metal nut test (tested in Interfloor laboratory) Low radius of effects of ignition BS 4790 & BS 5287
Other Specifications
Odour – No objectionable odour
Colour – / backing Purple / woven polypropylene backing
Packaging – Grey film / black print
Thermal resistance – 2.37 togs ‡ BS 4745
Impact sound reduction (Delta Lw) – 39dB ‡ BSEN ISO 140-8: 1998 and BSEN ISO 717-2: 1997
Emissions – (US Carpet & Rug Institute) Meets low VOC emission criteriaet & Rug Institute
