Sponge Rubber
Suitable for the stretch-fit installation of carpets
End Use Classification (BS 5808: 1991): GD/U, General Domestic Use
Air Hose T520
300 psi air hose manufactured to BS EN ISO2398 + BS5118/2
Cover: Black smooth SBR/NR, with good abrasion and weather resistance.Branding: DH BS EN ISO 2398 + BS5118/2 – 20 Bar – size – year of mfr.
Reinforcement: High tensile synthetic textile plies.
Tube: Black SBR /NR. Oil mist resistant.
Temperature: From -25°C to +70°C
Safety Factor: 3:1 Minimum
Size range and pressures
I.D. O.D. W.P. B.P.
mm mm Bar Bar
6 13 20 60
8 16 20 60
10 18 20 60
13 21 20 64
16 26 20 64
19 29 20 64
25 36 20 64
Heavy Duty Air Hose T620
300psi air hose manufactured to BS EN ISO2398 +BS 5118/2
Cover: Yellow or black SBR, with good abrasion, weather and ageing resistance.
Branding:Thor BS EN ISO 2398 + BS5118/2 Air Hose 20 Bar (Embossed)
Reinforcement: High tensile synthetic textile plies.
Tube: Black SBR, oil mist resistant.
Temperature:-25c +70c
Safety Factor:3:1 Minimum
Size range and pressures
I.D. O.D. W.P. B.P.
mm mm Bar Bar
10 20 20 64
13 23 20 60
16 25 20 60
19 30 20 60
25 37 20 60
32 46 20 60
38 52 20 60
45 60 20 60
51 66 20 60
63 80 20 60
76 93 20 60
102 119 20 60
Air Hose T640
600psi air hose manufactured to BS5118/3 & ISO2398
Cover:Yellow SBR, with good abrasion, weather and ageing resistance.
Branding:Thor BS EN ISO 2398 + BS5118/3
High Pressure Air Hose 40 Bar
Reinforcement:High tensile steel cords..
Tube:Black NBR, oil resistant.
Temperature:-30c +80c
Safety Factor:4:1 Minimum
Size range and pressures
I.D. O.D. W.P. B.P
mm mm Bar Bar
13 25 40 160
19 32 40 160
25 38 40 160
32 46 40 160
38 52 40 160
51 66 40 160
63 80 40 160
76 94 40 16
Medium Duty Water Delivery Hose manufactured to BS5119/A and ISO 1403.
Cover: Black NR/SBR, Abrasion and weather resistant.
Reinforcement: High strength textile plies.
Tube: Black NR/SBR.
Temperature: From -20°C to +70°C
Safety Factor: 3:1 Minimum
Size range and pressures
I.D. O.D. W.P. B.P.
mm mm Bar Bar
19 29 20 64
25 36 20 64
22 32 10 30
25 35 10 30
28 38 10 30
32 42 10 30
35 45 10 30
38 48 10 30
42 52 10 30
45 55 10 30
48 58 10 30
51 61 10 30
55 65 10 30
57 67 10 30
60 70 10 30
63 73 10 30
65 75 10 30
70 80 10 30
73 83 10 30
76 88 10 30
80 90 10 30
90 100 10 30
102 117 10 30
114 125 10 30
127 141 10 30
152 166 10 30
203 216 3.5 11
Heavy duty water suction and delivery hose manufactured to BS1102 : 1977 (1983).
Cover: Black NR/SBR resistant to weather, abrasion and ozone.
Branding: Water S/D W.P. 10 Bar – 150psi yellow stripe. 203mm Plain Black.
Reinforcement: Textile plies, high tensile steel wire helix.
Tube: Black NR/SBR.
Safety Factor: 3 : 1 minimum
Temperature: From -20°C to +70°C
Vacuum: 23ins. / Hg
Size range and pressures
I.D. O.D. W.P. Bend Radius
mm mm Bar mm
25 35 10 152
32 42 10 190
38 48 10 228
45 55 10 267
51 61 10 305
57 69 10 330
63 74 10 381
76 88 10 457
80 92 10 495
90 105 10 533
102 118 10 610
114 131 10 622
152 170 10 915
127 144 10 915
203 222 3.5 1200
Oil suction and delivery hose.
Cover: Black smooth conductive rubber, resistant to weather, abrasion, oil & ozone.
Flame resistant to TRbF-131-Teil 2-5.5
Branding: Logo Oil S/D W.P. 10 bar – 150 psi
Reinforcement: Textile plies, high tensile steel wire helix.
Tube: Black smooth synthetic rubber, resistant to mineral oils and fuels
with max 40% aromatic cntent.
Safety Factor: 3 : 1 minimum
Temperature: From -20°C to +70°C
Vacuum: 80%
Size range and pressures
I.D. O.D. W.P. Bend Radius
mm mm Bar mm
19 29 10 114
25 35 10 152
32 42 10 190
38 48 10 228
45 55 10 267
51 61 10 305
57 69 10 330
60 71 10 355
63 74 10 381
76 88 10 457
90 104 10 533
102 118 10 610
114 132 10 622
127 145 10 635
152 172 10 915
Oil Multi Purpose T920
Multipurpose Fuel Oil and Gasoline Hose, also suitable for use with Air & Water
Cover: Blue smooth CR/NBR, with good abrasion, weather & oil resistance.
Branding: Oil / Multipurpose Hose 20 bar
Reinforcement: High tensile synthetic textile plies.
Tube: Black smooth NBR – resistant to petroleum products with an aromatic content not exceeding 40%.
Temperature: From -30°C to +93°C oil ( +70°C max. with air or water).
Safety Factor: 3:1 Minimum
Size range and pressures
I.D. O.D. W.P. B.P.
mm mm Bar Bar
6 14 20 60
8 15 20 60
10 17 20 60
13 20 20 60
16 26 20 60
19 29 20 60
25 36 20 60
Oil Multi Purpose T910
Multi-purpose oil delivery hose.
Cover: Black CR/NBR rubber, resistant to weather, abrasion, oil and ozone.
Branding: ” – Multipurpose – Oil Delivery 20 Bar” Red Lettering
Reinforcement: High strength textile plies, anti-static wire.
Tube: Black NBR – suitable for oil, greases & various solvents and petroleum products with an aromatic content up to 40%.
Temperature: From -30°C to +70°C
Size range and pressures
I.D. O.D. W.P. B.P.
mm mm Bar Bar
13 23 20 60
16 27 20 60
19 32 20 60
25 38 20 60
32 46 20 60
38 52 20 60
45 61 20 60
51 67 20 60
57 71 20 60
63 79 20 60
76 92 20 6
Food and chemical suction and delivery hose.
Cover: Green EPDM-chemical, ozone and weather resistant rubber.
Branding: UHMWPE CHEMICAL S/D FOOD QUALITY W.P.10 BAR
– 150 psi Made In Italy
Reinforcement: Textile plies, high tensile steel wire helix & anti-static wire.
Tube: UHMWPE – Ultra high molecular weight polyethylene
100% food quality in accordance with FDA requirements.
Safety Factor: 3 : 1 minimum
Temperature: From -20°C to +100°C max, steam sterilising up to 130°C.
Vacuum: 26ins. / Hg
Size range and pressures
I.D. O.D. W.P. Bend Radius
mm mm Bar mm
19 32 10 114
25 38 10 152
32 45 10 190
38 51 10 305
51 65 10 305
63 79 10 381
76 93 10 457
102 123 10 610
Standard duty shotblast hose manufactured to BS5121.
Cover: Black NR with orange stripe. Anti-static abrasion and weather resistant rubber compounds.
Branding: Antistatic Shotblast- 12 bar Orange letters.
Reinforcement: Textile plies.
Tube: Black NR, abrasion resistant and electrically conductive.
Safety Factor: 3 : 1 minimum
Temperature: From -25°C to +70°C
Size range and pressures
I.D. O.D. W.P.
mm mm Bar
13 29 12
19 35 12
25 40 12
32 48 12
38 56 12
51 71 12
63 81 12
65 85 12
Heavy duty shotblast hose manufactured to BS5121.
Cover: Black NR Anti-static abrasion and weather resistant rubber compounds.
Branding: Antistatic Shotblast- 12 bar Orange Lettering
Reinforcement: Textile plies.
Tube: Black NR, abrasion resistant and electrically conductive.
Safety Factor: 3 : 1 minimum
Temperature: From -25°C to +70°C
Size range and pressures
I.D. O.D. W.P.
mm mm Bar
13 32 12
16 35 12
19 38 12
25 47 12
28 45 12
32 54 12
38 60 12
45 61 12
51 73 12
57 77 12
60 80 12
Hot Water T303
Hot Water Dairy Washdown Hose
Cover: Drab White NR / SBR. Non marking, abrasion and weather resistant.
Reinforcement: High tensile synthetic textile plies.
Tube: White NR / SBR.
Temperature: From -20°C to +120°C
Safety Factor: 3:1 Minimum
Size range and pressures
I.D. O.D. W.P. B.P.
mm mm Bar Bar
5 14 10 30
13 23 10 30
19 31 10 30
Steam Hose T307
Steam Hose manufactured to BS 5122 Type A2 and ISO 6134.
Cover: White EPDM – non marking rubber, excellent resistance to ageing and weathering.
Also available in black.
Branding: TT/BS5122/1986/A2/100psi/170c/Steam Hose/Drain After Use.
Reinforcement: High strength nylon plies.
Tube: Black EPDM compounded to withstand steam up to 170c.
Temperature: From -25°C to +170°C
Safety Factor: 10:1 Minimum
Size range and pressures
I.D. O.D. W.P. B.P.
mm mm Bar Bar
13 25 7 70
16 28 7 70
19 31 7 70
25 38 7 70
32 46 7 70
38 54 7 70
51 68 7 70
Superheated Steam Hose T317
Superheated Steam Hose manufactured to BS 5342 Type 2A
Cover: Red EPDM, excellent resistance to ageing & weathering. Also available with a black cover.
Branding: TT BS5342 2A year 17 bar – 250 psi size 232°C – 450F
Drain after use
Reinforcement: Spiral wire plies.
Tube: Black EPDM compounded to withstand steam up to 232°C.
Temperature: From -20°C to +232°C
Safety Factor: 10:1 Minimum
Size range and pressures
I.D. O.D. W.P. B.P.
mm mm Bar Bar
13 25 17 170
19 31 17 170
25 37 17 170
32 46 17 170
38 52 17 170
51 66 17 170
63 81 17 170
76 96 17 170
102 124 17 170
Band: BS 1449 Pt. 1
Housing: BS 1449 Pt. 1
Screw: BS 3111
Zinc Finish: Meets BS 7479 48 hrs NSS
2-Ear clamp widely used for maintenance and OEM applications. Mainly used on air, fluid, gas and steam lines, also suitable for low pressure hydraulic applications. Ideal for where the requirement is for a neat finish with no bulky housing to catch on obstructions. Pincers are used to crimp the ears of the clamps and affect a proper seal.
Stikatak adhesives are manufactured in Haslingden. They produces a range of high quality, environmentally friendly, low VOC adhesives and there R&D and Technical teams ensure that there products are suitable for use with the latest trends in floor coverings and health and safety requirements.
MSDS/COSHH and technical data sheets for all adhesives are available upon request.
Spray & Cartridge Adhesives
Gripperrods® tapes are manufactured in a UK factory in a quality controlled environment, which ensures the very high standards that have made Gripperrods® the market leader in this product sector. All tapes feature a woven scrim with a glass fibre weft and a polyester warp. The glass fibre gives maximum strength across the seam, The polyester allows some stretch along the length but none along the width as the glass fibre ensures stability. We offer a range of different specification tapes to suit your various requirements. All are designed to give a strength of finished seam in excess of British Standards. The finished seam strength will also depend on selecting the right tape for the job and using the best of tools.
Standard
This tape is designed for use in the fitting of felt backed carpets. The lower melt temperature of the adhesive prevents damage to the carpet backing. The ribbed adhesive profile is designed specifically for use with the Super Heat Seam Iron. This enables the tape to be centred automatically and ensures that the exact amount of adhesive is delivered for seam sealing. This tape also provides a lower cost alternative to Multiline tape for seaming conventional woven or secondary jute backed carpets in light traffic areas.
Backing width: 90mm
Adhesive width: 60mm
TX6702B
20m x 10 Per Carton
Multiline
Designed for traditional backed carpets installed in moderate traffic areas.
Backing width: 90mm
Adhesive width: 60mm
TX6712B
20m x 10 per carton
Seamwell
This tape offers an adhesive formulation and weight designed for high traffic installations and particularly for more difficult backings such as Action-Bac. The adhesive system is designed specifically to achieve good overall contact with these more rigid, uneven textured backings
Backing width: 90mm
Adhesive width: 60mm
TX6734B
20m x 10 Per Carton
Gripperrods® tapes are manufactured in a UK factory in a quality controlled environment, which ensures the very high standards that have made Gripperrods® the market leader in this product sector. All tapes feature a woven scrim with a glass fibre weft and a polyester warp. The glass fibre gives maximum strength across the seam, The polyester allows some stretch along the length but none along the width as the glass fibre ensures stability. We offer a range of different specification tapes to suit your various requirements. All are designed to give a strength of finished seam in excess of British Standards. The finished seam strength will also depend on selecting the right tape for the job and using the best of tools.
Standard
This tape is designed for use in the fitting of felt backed carpets. The lower melt temperature of the adhesive prevents damage to the carpet backing. The ribbed adhesive profile is designed specifically for use with the Super Heat Seam Iron. This enables the tape to be centred automatically and ensures that the exact amount of adhesive is delivered for seam sealing. This tape also provides a lower cost alternative to Multiline tape for seaming conventional woven or secondary jute backed carpets in light traffic areas.
Backing width: 90mm
Adhesive width: 60mm
TX6702B
20m x 10 Per Carton
Multiline
Designed for traditional backed carpets installed in moderate traffic areas.
Backing width: 90mm
Adhesive width: 60mm
TX6712B
20m x 10 per carton
Seamwell
This tape offers an adhesive formulation and weight designed for high traffic installations and particularly for more difficult backings such as Action-Bac. The adhesive system is designed specifically to achieve good overall contact with these more rigid, uneven textured backings
Backing width: 90mm
Adhesive width: 60mm
TX6734B
20m x 10 Per Carton
Carpet Gripper
Gripper has a 20mm strip with a pronounced bevel edge and is made of 5 ply Poplar plywood, which gives a good quality alternative to Russian Birch plywood. The zinc plated nails and galvanised pins are precision made to hold in any sub-floor and give the carpet holding strength required. Available with wood,concrete and dual purpose nails and medium pin.
Pre-Nailed for wood floors
Pre-nailed for ease and speed of installation when fitted to boarded or suspended timber floors, with specially tempered nails (threaded for holding power), pre-driven into the gripper. 20mm wide strip. There is 152mtr (500 foot) per box.
Grippercrete
Designed for ease of installation on concrete floors. Pre-nailed with high quality masonry nails for a firm fixing. 20mm wide strip. There is 152mtr (500 foot) per box.
Dual Purpose
Pre-nailed with dual purpose nails. Suitable for most wood and concrete based floors. There is 152mtr (500 foot) per box
Contract Gripper
Gripperrods Contract gripper is manufactured in the UK from 5 ply Russian Birch plywood and is a specialist product for particularly heavy stretch installations. It is 42mm wide and has 3 rows of carpet holding pins compared to the two rows in other gripper specifications. It is available in medium pin height only and without floor nails. This allows the fitter to install by nailing or adhering the gripper to the floor, depending on the installation.
There is 76mtr (250 foot) per box.
Single Sided Tapes
Double Sided Tapes
Vapour Barrier Tapes
Floor stripping & Preparation
Adhesive & Screed Applications
Cutting & Trimming
Cutting Blades
Measuring & Fixing
Stretching, Creasing & Tucking
Heat Seaming
Sponge Rubber
Suitable for the stretch-fit installation of carpets
End Use Classification (BS 5808: 1991): GD/U, General Domestic Use
Sponge Rubber
Suitable for stretch-fit installation of carpets
End Use Classification (BS 5808: 1991): L/U, Luxury Use
